SpeedFun Furious Evo easy+ for Bosch Performance Line CX (gen.5) Smart System – Rim Magnet

Manufacturer: SpeedFun
Product Code: SFBOSCHRIM5
This SpeedFun is intended exclusively for Bosch Performance Line CX Gen 5 (BDU384Y) motors with a wireless speed sensor (Bosch Rim Magnet).
Product availability
Delivery time 3-7 days
279,00 €
Get notified by email when the product is back in stock.
Affordable prices
Fast deliveries
Expert customer service
Finnish family business

SpeedFun Furious Evo Easy+ for Bosch Performance Line CX (Gen 5) Smart System - Motors with Wireless Rim Magnet

SpeedFun Furious Evo Easy+ is a high-quality tuning device designed for e-bikes equipped with Bosch Smart System Gen 5 motors. This tuning device removes the 25 km/h speed limit, allowing for motor assistance at higher speeds. It is compatible exclusively with Bosch Performance Line CX (Gen 5 BES3, BDU384Y) motors, equipped with a wireless magnet in the valve (Bosch Rim Magnet).

Remove your e-bike's speed limit and enjoy the freedom!

Features:

  • Installation: Internal (completely invisible from the outside)
  • Dimensions: 37 x 22 x 7.5 mm
  • Connections: Equipped with original and/or compatible connectors (does not require physical changes to the e-bike wiring)
  • Assistance: Up to 60 km/h.
  • Compatible motor: Bosch Performance Line CX (Gen.5 – BES3, BDU384U) Smart System
  • Compatible speed sensor type: Wireless Rim Magnet
  • Compatible displays: Bosch LED Remote, Bosch System Controller, Intuvia 100, Kiox 300, Kiox 500, Mini Remote, Purion 200, Purion 400
  • Displays: shows altered data
  • Activation: always active if the blue wire is not cut.
  • Carefully review installation instructions, motor removal may be required.
  • Installation Guide-Speedfun-Bosch-Gen5-Rim-Magnet.pdf
     

Warning:

Note that using such modified e-bikes on public roads may be illegal. The manufacturer and retailer are not responsible for damages resulting from the use of SpeedFun products. E-bikes equipped with SpeedFun products must not be used on public roads, bike paths, and public places. They should be used exclusively on private property and at your own risk. Using SpeedFun may void your bike's warranty. We strongly recommend the use of other safety features and protective gear to prevent injuries.

We recommend not updating your e-bike's firmware. Updates increase the risk of detecting the tuning and may affect the operation of Speedfun.

What is the SpeedFun Furious Evo tuning for the Bosch Performance Line CX Gen 5 Smart System – Rim Magnet motor?

The SpeedFun Furious Evo is a tuning device that optimizes the Bosch Smart System motor's performance by manipulating the rear wheel speed data. It constantly sends a speed signal of under 25 km/h to the motor, allowing the actual riding speed to be significantly higher due to the combined effect of motor and pedaling power.

Operating Principle:

The display shows accurate speed up to about 20 km/h, but beyond this, the displayed speed remains under 25 km/h.

The real maximum speed is determined by the motor and pedal force of the rider.

Compatibility

Only compatible with the following motors:

Bosch Performance Line CX (Gen 5 BES3, BDU384Y)

Only for bikes with a wireless Bosch Rim Magnet (valve magnet).

Compatible control systems:

  • LED Remote / System Controller
  • LED Remote + Kiox 300/500, Intuvia 100, Purion 400
  • System Controller + Mini Remote
  • Purion 200

Installation and Use

  • SpeedFun Furious Evo comes ready to use.
  • Can be activated and deactivated at any time. (Always active if the blue wire is not cut, see more in the downloadable instructions)
  • Retains settings even if the bike is turned off.
  • Includes all necessary parts for installation.
  • We do not recommend updating the motor, as it may affect the operation of Speedfun.
  • We recommend disabling automatic updates of the Bosch Flow system.

NOTE! Not compatible with the following systems:

  • Traditional spoke or brake disc magnet.
  • Bosch ABS system.
  • Bosch GPS system (ConnectModule).

The SpeedFun Furious Evo is specifically designed for the Bosch Performance Line CX (Gen 5 BES3, BDU384Y) Smart System motor, ensuring optimal performance and reliability.


E-bikes with a Bosch Performance Line CX Smart System (Gen. 5) and a rim sensor, on which the Furious Evo Easy+ device has been successfully installed (This list is indicative and not exhaustive.)

Focus

  • JAM² 6.9
  • JAM² 6.7
  • JAM² 6.0

Santa Cruz

  • Vala XX AXS RSV
  • Vala X0 AXS RSV
  • Vala S
  • Vala R
  • Vala GX AXS

Trek

  • Rail+ 9.9 / 9.8 / 9.7 / 8 / 5 (Gen. 5, 2025)
  • Powerfly+ 8 / 6 / 4 (Gen. 5, 2025)